USD 1
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:BT30,BT40,BT50
Transportation:Ocean,Land,Air
Packaging: carton
Supply Ability:5000
Place of Origin:jining,china
Productivity:2000-3000 pieces per month
CNC tool holder CNC BT face milling holder,Face milling cutter ,Cooperate with all kinds of the knife dish , is suitable for the gantry NC milling machine and general plane processing,Hole is beneficial to the water and strong vibration...
USD 1
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:BT30,BT40,BT50
Transportation:Ocean,Land,Air
Packaging: carton
Supply Ability:5000
Place of Origin:jining,china
Productivity:2000-3000 pieces per month
High quality BT milling cutter CNC face mill holder is an indispensable tool for clamping the shank in the machining industry. BT FACE MILLING HOLDER Its precision is 0.05mm. The diameter clamping range is 0.5-16mm bit. Mechanical spindle and...
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:BT30,BT40,BT50
Transportation:Ocean,Land,Air
Packaging: carton
Supply Ability:5000
Place of Origin:jining,china
Productivity:2000-3000 pieces per month
CNC machine tools Face Mill Holder BT30/40/50 FMB tools holder Face Mill Cutter BT50 CNC Tool Holder ,The diameter clamping range is 0.5-16mm bit. BT FACE MILLING HOLDER is an indispensable tool for clamping the shank in the machining industry. Its...
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:BT30,BT40,BT50
Transportation:Ocean,Land,Air
Packaging: carton
Supply Ability:5000
Place of Origin:jining,china
Productivity:2000-3000 pieces per month
BT FMB Arbor Milling Machine Face Milling Cutter Shank Tool Holder, BT face milling holder The main types of BT50 plane milling tool shank series are . Material: Titanium alloy 20CrMnTi, wear-resistant and durable. Tool handle hardness 58-60...
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:BT30,BT40,BT50
Transportation:Ocean,Land,Air
Packaging: carton
Supply Ability:5000
Place of Origin:jining,china
Productivity:2000-3000 pieces per month
milling tool holder BT FMB face milling holder,Material: alloy 20CrMnTi, wear-resistant and durable. Tool handle hardness 58-60 degrees, low noise, low wind resistance, high repetitive clamping accuracy. It is a tool handle for special face milling...
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:BT30,BT40,BT50
Transportation:Ocean,Land,Air
Packaging: carton
Supply Ability:5000
Place of Origin:jining,china
Productivity:2000-3000 pieces per month
BT Face Milling Chuck Tool Holder CNC Mill Collet Chuck,clip in the design of the site, to prevent vibration, clamping force, high accuracy.by cryogenic treatment, to ensure the quality stability, durability and no deformation, excellent wear...
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:BT30,BT40,BT50
Transportation:Ocean,Land,Air
Packaging: carton
Supply Ability:5000
Place of Origin:jining,china
Productivity:2000-3000 pieces per month
BT-FMA/FMB face mill arbor, face mill CNC tool holder , is suitable for the gantry CNC milling machine and general plane processing,Hole is beneficial to the water and strong vibration resistance,Cooperate with all kinds of the knife dish.BT Face...
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:BT30,BT40,BT50
Transportation:Ocean,Land,Air
Packaging: carton
Supply Ability:5000
Place of Origin:jining,china
Productivity:2000-3000 pieces per month
High speed Face Mill Arbor collet chuck BT FMB Milling chuck tool holder. It is a tool holder for special face milling cutter disc. The whole through hole is conducive to water discharge and has good seismic resistance.Mechanical spindle and cutting...
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:BT30,BT40,BT50
Transportation:Ocean,Land,Air
Packaging: carton
Supply Ability:5000
Place of Origin:jining,china
Productivity:2000-3000 pieces per month
BT FMB collet chuck face mill holder for CNC Machine, Material: Titanium alloy 20CrMnTi, wear-resistant and durable. BT Face Milling Holder used in the clamping of the cutter with the radial drive groove, such as the face milling cutter, the...
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:BT30,BT40,BT50
Transportation:Ocean,Land,Air
Packaging: carton
Supply Ability:5000
Place of Origin:jining,china
Productivity:2000-3000 pieces per month
BT FMA Face Milli Arbor BT30 CNC Tool Holder ,Cooperate with all kinds of the knife dish , is suitable for the gantry NC milling machine and general plane processing,Hole is beneficial to the water and strong vibration resistance,The diameter...
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:BT30,BT40,BT50
Transportation:Ocean,Land,Air
Packaging: carton
Supply Ability:5000
Place of Origin:jining,china
Productivity:2000-3000 pieces per month
BT CNC arbor adapters shell face mill holder is an indispensable tool for clamping the shank in the machining industry. BT face milling holder precision is 0.05mm. The diameter clamping range is 0.5-16mm bit. Mechanical spindle and cutting tools and...
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:BT40-FMB27
Transportation:Ocean,Land,Air
Packaging: carton
Supply Ability:5000
Place of Origin:jining,china
Productivity:2000-3000 pieces per month
BT Arbor For Face Milling Cutter, BT Face Milling Holder used in the clamping of the cutter with the radial drive groove, such as the face milling cutter, the vertical disc cutter, the set type end mill. Specifications 1.Bt Collet Chuck Materail:...
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:BT30,BT40,BT50
Transportation:Ocean,Land,Air
Packaging: carton
Supply Ability:5000
Place of Origin:jining,china
Productivity:2000-3000 pieces per month
Face milling cutter for milling cutter handle ,Cooperate with all kinds of the knife dish , is suitable for the gantry NC milling machine and general plane processing,Hole is beneficial to the water and strong vibration resistance,BT Face Milling...
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:BT30,BT40,BT50
Transportation:Ocean,Land,Air
Packaging: carton
Supply Ability:5000
Place of Origin:jining,china
Productivity:2000-3000 pieces per month
BT face milling machine arbor extensions tool holder , Its precision is 0.05mm. The diameter clamping range is 0.5-16mm bit. Mechanical spindle and cutting tools and other accessories.High Precision BT shank Tool Holder ,balanced G6.3 or G2.5 For...
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:BT50
Transportation:Ocean,Land,Air
Packaging: carton
Supply Ability:5000
Place of Origin:jining,china
Productivity:2000-3000 pieces per month
BT50 Face Milling Holder CNC Tool Holder ,Cooperate with all kinds of the knife dish , is suitable for the gantry NC milling machine and general plane processing,Hole is beneficial to the water and strong vibration resistance,The diameter clamping...
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:BT50
Transportation:Ocean,Land,Air
Packaging: carton
Supply Ability:5000
Place of Origin:jining,china
Productivity:2000-3000 pieces per month
BT FACE MILLING HOLDER is an indispensable tool for clamping the shank in the machining industry. BT FACE MILLING HOLDER Its precision is 0.05mm. The diameter clamping range is 0.5-16mm bit. Mechanical spindle and cutting tools and other...
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:BT30,BT40,BT50
Transportation:Ocean,Land,Air
Packaging: carton
Supply Ability:5000
Place of Origin:jining,china
Productivity:2000-3000 pieces per month
BT face milling holder The main types of BT50 plane milling tool shank series are . Material: Titanium alloy 20CrMnTi, wear-resistant and durable. Tool handle hardness 58-60 degrees, low noise, low wind resistance, high repetitive clamping accuracy....
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:BT30,BT40,BT50
Transportation:Ocean,Land,Air
Packaging: carton
Supply Ability:5000
Place of Origin:jining,china
Productivity:2000-3000 pieces per month
BT FMB face mill arbor milling tool holder for cnc machine, BT Face Milling Holder used in the clamping of the cutter with the radial drive groove, such as the face milling cutter, the vertical disc cutter, the set type end mill. Specifications 1.BT...
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:BT30,BT40,BT50
Transportation:Ocean,Land,Air
Packaging: carton
Supply Ability:5000
Place of Origin:jining,china
Productivity:2000-3000 pieces per month
Face Mill Cutter BT50 CNC Tool Holder is an indispensable tool for clamping the shank in the machining industry. BT FACE MILLING HOLDER Its precision is 0.05mm. The diameter clamping range is 0.5-16mm bit. Mechanical spindle and cutting tools and...
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:BT30,BT40,BT50
Transportation:Ocean,Land,Air
Packaging: carton
Supply Ability:5000
Place of Origin:jining,china
Productivity:2000-3000 pieces per month
BT Face Milling Holder lathe tool holder,BT face milling holder The main types of BT50 plane milling tool shank series are . Material: Titanium alloy 20CrMnTi, wear-resistant and durable. Tool holder hardness 58-60 degrees, low noise, low wind...
BT Face Milling Holder Cnc Milling Tool Holders , used in the clamping of the cutter with the radial drive groove, such as the Face Milling Cutter, the vertical disc cutter, the set type end mill, high speed and high precision machining .Mechanical spindle and cutting tools and other accessories.High Precision BT shank TOOL HOLDER ,balanced G6.3 or G2.5 For choose.We are specializing in the production of BT FMB Face Mill Holder, we can to figure to sample processing, and perfect after-sales service and technical support. Looking forward to your cooperation!
Production Process
Tel: 00-86-05373281595
Fax: 86-0537-3281596
Mobile Phone: +8613705473076
Email: james.wang@qfmh.com
Address: NO.47 JINYU ROAD , JINING SHANDONG 272000 CHINA
Country/Region: China
Wechat: 86 13705473076
About Us
Related Products List
Contact Us
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
