CAT40 FMB Tool Holder Face Mill Arbors

CNC Tooling CAT40 FMB TOOL HOLDER Face Mill Arbors COLLET CHUCK , The inner cone is tested with a standard pneumatic measuring instrument, and the contact area ratio of the big end is over 90%,used in the clamping of the cutter with the radial drive groove, such as the Face Milling Cutter, the vertical disc cutter, the set type end mill, high speed and high precision machining .

Tool Holder:
1. The shank 7:24 taper accuracy ≤ AT3 and some standard sizes are all tested on the standard inspection tool made in Germany.
2. The inner cone is tested with a standard pneumatic measuring instrument, and the contact area ratio of the big end is over 90%.
3. The shank body jumps ≤0.002.
5.Cat Face Milling Holder the handle is suitable for medium speed precision machining
6. Dynamic balance: G6.3 12000/18000RPM G2.5 15000/25000RPM can be made according to demand. It can also be customized according to customer requirements.
7. Each FMA/FMB face milling cutter is equipped with screws and lugs for assembly of face milling cutters.
8.if you have a production plane milling cutter - extended type, you can ask.
9.CAT Face Milling Holder material: 20CrMnTi.
10.CAT Face Milling Holder hardness: HRC54 ° -60 °
11.CAT Face Milling Holder Carburizing depth: >0.8.