High accuracy ER sealed water coolant collet

High accuracy ER sealed water coolant collet,Spring Collet Differences in the use of grooves to reach around the sealing
O Central water feature only applies to folders to hold the water hole tool,Canwithstand water pressure 7Mpa Non-standard holes can be customized.

1. ER COLLET Material: 65MN
2. Er Sealed Collet Hardness: 46-50HRC;

High Accuracy ER Sealed Collet install
1. Install the groove of the spring collet into the eccentric circle of the nut, push the spring collet in the direction indicated by the arrow until you hear a click, which means the spring collet has been installed in place.
2. Then install the spring collet onto the prop and make sure the tool is installed in place
3. Install the nut onto the handle and lock it with a wrench. (It is recommended to use a torque wrench to tighten the nut)

disassemble
After screwing the nut off the toolholder, pull out the toolholder, push it inward from the front of the spring collet and press it downward against the bottom of the eccentric circle at the same time, and push the spring collet diagonally until the spring collet and nut are disassembled