JINING QINFENG MACHINERY HARDWARE CO.,LTD
JINING QINFENG MACHINERY HARDWARE CO.,LTD
Home> Industry Information> Installation method of spring clamp collet

Installation method of spring clamp collet

July 04, 2019

1. Firstly, the chuck is put into the nut and rotated gently. Then the eccentric part of the nut is concaved into the chute of the chuck spring. The chuck spring is moved uniformly along the arrow direction and loaded into the nut.


2. Install the clamp spring and the nut together on the chuck body or machine tool spindle, wipe off the cylindrical handle of the tool and put it into the clamping hole. Use the wrench to tighten the nut evenly and vigorously until the tool is clamped。

3. When changing the cutter, loosen the nut with a wrench to take out the chuck and the cutter, remove the cutter, push the clip spring to withdraw, and then replace the clip spring with other apertures as needed. [Note and avoid tightening nuts when no cutter is installed to avoid damaging the clip spring]

The above is the Installation method of spring clamp collet we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Home> Industry Information> Installation method of spring clamp collet
We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send