JINING QINFENG MACHINERY HARDWARE CO.,LTD
JINING QINFENG MACHINERY HARDWARE CO.,LTD
Home> Industry Information> What is the manufacturing process of spring chuck

What is the manufacturing process of spring chuck

December 09, 2020

Manufacturing technology of spring chuck: in the process, first put the chuck into the pressure cap, and then work the clamp spring gently. After the eccentric layout of the pressure cap is concave into the snap spring groove, place the clamp spring along the arrow, and then use force to make the clamp spring, so that the cone can be in two halves. The ER chuck needs to turn to the sliding sleeve, that is, the drilling and tapping sleeve can be reliably replaced. When drilling, the Morse sleeve is fully automatic locked; when tapping, the torque load can be stable to avoid the two halves of the tap. In addition, when changing the tool, loosen the pressure cap with a spanner, lead out the collet and the cutter, remove the cutter, position the clamp spring along the arrow, pull it out, and then replace the retaining ring with other hole diameters as required. The adjustability of the Spring Collet structure is often chosen according to the way of bolt fastening and pin position. When adjusting and installing the fixture, the length of a part can be easily ground.


The clamping force of the spring chuck is relatively large, and the clamping environment is relatively wide, and at the same time, it also has a high reliability, so it is widely used in some light industries, such as the application in the light industry of machine tools. For ER chucks, it will have different categories, and different types of collets are applied to different biases. It has not low reliability, and can make the reliable position of the workpiece in a certain position, which plays a key role in the smooth production of the product. At the same time, it also increases and improves the production efficiency of the product. Spring collet should pay attention to the surface repair of decoration, which directly affects the surface texture of the product. It is characterized by preventing rust. Therefore, it is very important to select a suitable, good and professional lubricating oil. Spring collet is common in machine tools, now it is irreplaceable software, the application environment is especially large, efficient but easy to damage, so the consumption is magnificent. According to the different data of spring collet, the heat treatment method is different, and the hardness requirements of each part of spring chuck are different.

The above is the What is the manufacturing process of spring chuck we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Home> Industry Information> What is the manufacturing process of spring chuck
We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send