JINING QINFENG MACHINERY HARDWARE CO.,LTD
JINING QINFENG MACHINERY HARDWARE CO.,LTD
Home> News> Spring collet is widely used
December 02, 2019

Spring collet is widely used

Production skills of Spring Collet: first add the collet into the pressure cap on the way, gently run the circlip, and when the eccentric layout of the pressure cap is concave into the groove of the circlip, evenly and forcefully promote the circlip along the direction of the arrow, the cone can be broken. The ER chuck only needs to be turned to the sliding sleeve to change the drilling and tapping sleeve rapidly. When drilling, the Morse sleeve can be found automatically; when tapping, the torque reserve load can slip smoothly, which inevitably prevents the tap from breaking. In addition, when changing tools outside the boundary, use a wrench to loosen the pressing cap to take out the collet and the tool, remove the tool, force the circlip along the direction of the arrow, exit it, and then replace the circlip with another hole diameter as required. The adjustability of the spring collet is usually selected according to the law of bolt fastening and pin position. When the collet is adjusted and arranged, the length of a circuit can be easily polished.

Spring chuck has a lot of clamping force ratio, a wide range of clamping plane, and a high reliability at the same time, so it has been widely used in some industries, such as the application in machine tool industry. For ER chuck, it has different types, and different types of chuck are applied in different levels. It can have not low reliability, can quickly position the parts in a certain direction, which plays an important role for the smooth production of the manual, and also improves the production efficiency of the manual. The spring chuck should pay attention to the surface maintenance of the equipment, which directly affects the surface quality of the instruction manual. The key is to treat the rust. Therefore, it is very important to select the same suitable, high-quality and senior grease. Spring collet is a kind of equipment which can not be replaced in machine tools. The plane range of application is quite large, fast but easy to affect, so the consumption is huge. According to different data, the way of heat treatment is different, and the hardness requirements of different parts of spring chuck are different.
Share to:

LET'S GET IN TOUCH

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send