Do we really understand the correct operation of spring collet?

Among the manufacturers around us, there are many manufacturers of spring collets. The important reason is that we often use collets As one of the professional manufacturers, CNC chuck manufactures and supplies many kinds of related products, such as spring chuck, bobbin clamp, er chuck, etc. each product has its own outstanding characteristics and a certain range of use.

In order to develop the Spring Collet successfully and achieve very bad use effect, the first thing we need to control is the accurate operation method. We know the characteristics and functions of the collet, but how much do you know about its accurate manual operation?
ER COLLET

For the professionals concerned, as our explanation, the spring collet is often used as a unique structure and a spare part. When using, put the collet into the pressing cap first, rotate the circlip at the fingertip, and wait until the shaft of the pressing cap is in the groove of the circlip, evenly push the circlip along the direction of the arrow, and the cone can fall off. Therefore, the collet only needs to move the sliding sleeve, which can make the drilling and tapping sleeve exchange rapidly.

When drilling, the Morse sleeve is manually aligned; when tapping, the torque overload can stabilize the tire burst and prevent the tap from falling off. In addition, when changing the tool, use a wrench to loosen the collet and the tool brought out by the pressing cap, put down the tool, and use force to promote the circlip along the direction of the arrow, so that it can be dissolved, and then replace the circlip with other apertures as required.