What industry is widely used in CNC lathe chuck?

Production process of numerical control chuck: first of all, pour the chuck into the pressing cap, gently operate the circlip, and when the eccentric part of the pressing cap is concave into the circlip groove, position it evenly along the arrow and exert force to carry out the circlip, that is to say, two halves of the cone can be used. The ER chuck only needs to transfer the sliding sleeve, which can make the drilling and tapping sleeve reliable replacement. When drilling, the Morse sleeve can be found by itself; when tapping, the torque carrier can be smooth and slippery to prevent the tap from two halves. In addition, when changing the tool, use a wrench to loosen the pressing cap to take out the collet and the tool, remove the tool, position along the arrow and use the force to clamp the spring, and then replace it with a clamp spring of various apertures according to the limit. The adjustability of the chuck structure of CNC lathe often depends on the law of bolt fastening and pin position. When adjusting and arranging the clamp, it can easily grind the length of a certain circuit.

The clamping force ratio of numerical control chuck is many, and the clamping range is wide, moreover, it also obtains high precision, so it is widely used in a kind of light industry, such as in the light industry of machine tools. Compared with ER chuck, it has different types, and different types of chuck are applied in different levels. It can locate the parts in a certain position credibly, which plays an important role in the smooth production of goods, and also improves the production efficiency of goods. CNC chuck should pay attention to the surface maintenance of equipment, which directly affects the surface quality of goods, the core is to treat corrosion, so it is very important to select the same suitable, excellent and professional antirust oil. The numerical control chuck is a common and irreplaceable device in machine tools. It is widely used, safe but easy to harm, so the consumption is huge. According to different materials, the limited heat treatment methods are different, and the hardness requirements of different parts of the chuck are different.