Product Categories
(Total 24 Products for Cat40 Pull Stud)
Brand: QFMH
Packaging: carton
Supply Ability: 5000
Min. Order: 1 Piece/Pieces
High Precision CAT CNC pull stud has 45 degrees 60 degrees and 90 degrees which belongs to American thread pull screw Mainly used in CNC numerical control machine tool 50 taper handle CNC tool holder pull stud is made of high quality steel 20CrMnTi CNC pull stud According to different uses the hardness HRC is between...
Brand: QFMH
Packaging: carton
Supply Ability: 5000
Min. Order: 1 Piece/Pieces
HIgh Quality BT Pull studs 45 Degree pull studs Morse BT30 40 50 pull stud Deep cooling treatment and thermal aging treatment can reduce residual stress and improve durability and accuracy stability Adopt surface coating technology to improve the anti wear ability of the surface better anti rust and anti corrosion...
Brand: QFMH
Packaging: carton
Supply Ability: 5000
Min. Order: 1 Piece/Pieces
Pull stud by SK standard Pull studs of minor quality not only decrease the performance of the machine they are even a safety risk A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons Carburization pull stud make of high quality steel Carburizing and quenching process of...
Brand: QFMH
Packaging: carton
Supply Ability: 5000
Min. Order: 1 Piece/Pieces
BT pull stud Deep cooling treatment and thermal aging treatment can reduce residual stress and improve durability and accuracy stability Adopt surface coating technology to improve the anti wear ability of the surface better anti rust and anti corrosion effect more stable accuracy smoother surface and more beautiful...
SK sealing Pull stud 45° 60° 90°
Brand: QFMH
Packaging: carton
Supply Ability: 5000
Min. Order: 1 Piece/Pieces
SK sealing Pull stud 45 60 90 of minor quality not only decrease the performance of the machine they are even a safety risk A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons SK Pull stud Product introduction 1 SK Pull stud Material 20CrMnTi 2 SK Pull stud Carburizing...
Brand: QFMH
Packaging: carton
Supply Ability: 5000
Min. Order: 1 Piece/Pieces
High Precision CAT CNC pull stud has 45 degrees 60 degrees and 90 degrees which belongs to American thread pull screw Mainly used in CNC numerical control machine tool 50 taper handle CNC tool holder pull stud is made of high quality steel 20CrMnTi CNC pull stud According to different uses the hardness HRC is between...
BT40 Pull Studs for BT shank holder
Brand: QFMH
Packaging: carton
Supply Ability: 5000
Min. Order: 1 Piece/Pieces
BT30 Pull Stud for BT shank holder Pull stud of minor quality not only decrease the performance of the machine they are even a safety risk A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons BT Pull Stud Material 20CrMnTi BT Pull Stud Carburization depth 0 8 Cnc Pull...
DIN2080 NT40 tool holder Pull Stud
Brand: QFMH
Packaging: carton
Supply Ability: 5000
Min. Order: 1 Piece/Pieces
High quality Retention Knob for DIN2080 NT40 tool holder Pull Stud One end of the NT pull stud is connected with the bayonet of the machine tool one end is connected with the tool holder and the d part is inserted in accordance with the degree of the machine bayonet The g part is screwed and the handle is tightened...
SK Pull Stud for DIN69871 Tool Holder
Brand: QFMH
Packaging: carton
Supply Ability: 5000
Min. Order: 1 Piece/Pieces
SK Pull Stud for DIN69871 Tool Holder Pull stud 45 60 90 of minor quality not only decrease the performance of the machine they are even a safety risk A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons SK Pull stud Product introduction 1 Type BT DIN ISO CAT40 MAS JIS...
SK Pull Stud With Standard DIN 69872
Brand: QFMH
Packaging: carton
Supply Ability: 5000
Min. Order: 1 Piece/Pieces
SK Pull Stud With Standard DIN 69872 Pull studs of minor quality not only decrease the performance of the machine they are even a safety risk A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons SK Pull Stud Specifications 1 SK Pull Stud material alloy steel 2 SK Pull...
Brand: QFMH
Packaging: carton
Supply Ability: 5000
Min. Order: 1 Piece/Pieces
Stainless steel BT pull stud is also called a rod shaped part with a cap at one end of the metal After penetrating into the connected component it strikes and extrudes the other end of the rod to press and fix the component Stainless steel BT pull stud will not cause corrosion pitting rust or wear Stainless steel BT...
CNC Milling Tool Holder NT40 Pull Stud
Brand: QFMH
Packaging: carton
Supply Ability: 5000
Min. Order: 1 Piece/Pieces
CNC Milling Spindle Tool Holder NT Pull Stud One end of the CNC pull stud is connected with the bayonet of the machine tool one end is connected with the tool holder and the dpart is inserted in accordance with the degree of the machine bayonet The g part is screwed and the handle is tightened The axial force...
CAT40 Side Lock End Mill Adapters/Holders
Brand: QFMH
Packaging: carton
Supply Ability: 5000
Min. Order: 1 Piece/Pieces
CAT40 Side Lock End Mill Adapters Holders apply to the holder of a DIN1835 B with a solid surface of the cutting tool high speed and high precision machining Toolholder is commonly used spare parts for milling machine this is problem to frequently change Toolholder underside increases completely covering the lower...
Collet chuck for CAT30/CAT40/CAT50 OZ Series
Brand: QFMH
Packaging: carton
Supply Ability: 5000
Min. Order: 1 Piece/Pieces
Collet chuck for CAT30 CAT40 CAT50 OZ Series tool holder for mechanical spindle and cutting tool and other accessory tool connection Is a simple popular spindle shank connection standard mainly CT30 CT40 CT50 Etc Mold industry and high speed engraving machine used more DIN6391 CAT OZ Collet Chuck DIN6388 OZ collet...
Tool holder for CAT30/CAT40/CAT50 OZ Series
Brand: QFMH
Packaging: carton
Supply Ability: 5000
Min. Order: 1 Piece/Pieces
Tool holder for CAT30 CAT40 CAT50 OZ Series tool holder for mechanical spindle and cutting tool and other accessory tool connection Is a simple popular spindle shank connection standard mainly CT30 CT40 CT50 Etc Mold industry and high speed engraving machine used more DIN6391 CAT OZ Collet Chuck DIN6388 OZ collet...
DIN2080 NT30 pull stud for toolholder
Brand: QFMH
Packaging: carton
Supply Ability: 5000
Min. Order: 1 Piece/Pieces
DIN2080 NT30 pull stud for toolholder Made of high quality alloy steel has higher wear resistance and better toughness NT pull stud Precision grinding pull stubs have higher surface finish and dimension accuracy NT pull stud Precision finished on the bottom of the flange to improve fitting with the bottom nose of the...
NT Retention Knob Pull Stud for CNC Lathe
Brand: QFMH
Packaging: carton
Supply Ability: 5000
Min. Order: 1 Piece/Pieces
NT Retention Knob Pull Stud for CNC Lathe Pull studs of minor quality not only decrease the performance of the machine they are even a safety risk A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons NT Pull Stud Specifications 1 NT Pull Stud Material 20CrMnTi 2 NT Pull...
high precision 40Cr DIN2080 retention knob pull studs
Brand: QFMH
Packaging: carton
Supply Ability: 5000
Min. Order: 1 Piece/Pieces
high precision 40Cr DIN2080 retention knob pull studs Made of high quality alloy steel has higher wear resistance and better toughness NT pull stud Precision grinding pull stubs have higher surface finish and dimension accuracy NT pull stud Precision finished on the bottom of the flange to improve fitting with the...
Pull Stud for NT Milling Tool Holder
Brand: QFMH
Packaging: carton
Supply Ability: 5000
Min. Order: 1 Piece/Pieces
CNC Retention Knob Pull Stud for NT DIN2080 Milling Tool Holder There are three types of NT pull stud NT30 NT40 and NT50 which are mainly used in NT CNC tool holder NT30 tool holder with NT30 pull stud NT40 tool holder with NT40 pull stud NT50 tool holder with NT50 pull stud The pull stud is made of high quality steel...
CNC NT retention knob Pull Stud
Brand: QFMH
Packaging: carton
Supply Ability: 5000
Min. Order: 1 Piece/Pieces
NT retention knob Pull Stud There are three types of NT pull stud NT30 NT40 and NT50 which are mainly used in NT CNC tool holder NT30 tool holder with NT30 pull stud NT40 tool holder with NT40 pull stud NT50 tool holder with NT50 pull stud The pull stud is made of high quality steel 20CrMnTi with HRC hardness ranging...
DIN69872 PULL STUD Retention knob
Brand: QFMH
Packaging: carton
Supply Ability: 5000
Min. Order: 1 Piece/Pieces
DIN69872 PULL STUD Retention knob Pull studs are an important link between machine and tool The requirements concerning accuracy rigidity and reliability are very high Pull studs of minor quality not only decrease the performance of the machine they are even a safety risk A breaking pull stud might cause severe damage...
pull studs for SK40 collet chuck SK30/40/50-G
Brand: QFMH
Packaging: carton
Supply Ability: 5000
Min. Order: 1 Piece/Pieces
pull studs for SK40 collet chuck DIN69872 SK30 40 50 G Pull stud 45 60 90 of minor quality not only decrease the performance of the machine they are even a safety risk A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons SK Pull stud Product introduction 1 SK Pull stud...
DIN69872 1988 JT pull studs SK pull studs
Brand: QFMH
Packaging: carton
Supply Ability: 5000
Min. Order: 1 Piece/Pieces
DIN69872 1988 JT pull studs SK pull studs Pull studs of minor quality not only decrease the performance of the machine they are even a safety risk A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons Specifications 1 SK pull stud Material 20CrMnTi 2 SK Pull stud is...
CNC Tool Holder Accessory BT40 Pull Stud
Brand: QFMH
Packaging: carton
Supply Ability: 5000
Min. Order: 1 Piece/Pieces
CNC Tool Holder Accessory BT40 Pull Stud is also called a rod shaped part with a cap at one end of the metal After penetrating into the connected component it strikes and extrudes the other end of the rod to press and fix the component Stainless steel BT pull stud will not cause corrosion pitting rust or wear...
Review
Gaurishankar Banaji Diwan
Nov 24, 2019
4
Mr.mr.gabriel Golan
Nov 13, 2019
5
Mr.terence
Nov 09, 2019
4
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Send Inquiry
Mr. jiames.wang
Tel:86-0537-3281595
Fax:86-0537-3281597
Mobile Phone:+8613705473076
Email:info@qfmh.com
Address:ROOM C-911,9/F.,ZHICHENG INTERNATIONAL CENTRE, , Jining, Shandong
Related Products List
Mobile Site