Drill Chuck Shank - manufacturer, factory, supplier from China

pull studs for SK40 collet chuck SK30/40/50-G

• Brand: QFMH

• Packaging: carton

• Supply Ability: 5000

• Min. Order: 1 Piece/Pieces

pull studs for SK40 collet chuck DIN69872 SK30 40 50 G Pull stud 45 60 90 of minor quality not only decrease the performance of the machine they are even a safety risk A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons Cnc Pull Stud Product introduction 1 SK Pull stud...

Contact Now

ER40 COLLET CHUCK BT TOOL HOLDER

• Brand: QFMH

• Packaging: carton

• Supply Ability: 5000

• Min. Order: 1 Piece/Pieces

The commonly used specifications of ER40 tool holder are BT40 and BT50 the length of which is er40 100 and er40 150 Tool holder material 20CrMnTi is selected as high quality material After heat treatment it has better elasticity and wear resistance high precision stable performance wear resistance and durability BT...

Contact Now

tool holder for high precision spanner drill chuck

• Brand: QFMH

• Packaging: carton

• Supply Ability: 5000

• Min. Order: 1 Piece/Pieces

tool holder for high precision spanner drill chuck is connected with the tool is used to clamp the handle type tool accessories Key Type Drill Chuck There are two connection ways threaded connections and taper connection According to the specifications of the chuck now specifications of the main thread of the 3 8...

Contact Now

Collet Chuck Tool Holder Hook Spanner

• Brand: QFMH

• Packaging: carton

• Supply Ability: 5000

• Min. Order: 1 Piece/Pieces

The Hook Spanner Wrench is mainly used for disassembling the handle nuts Different handle nuts choose different Hook Spanner wrenches ER tool holder is ER wrench ERA nut is ERA wrench GER handle SK tool holder GSK handle is bearing wrench C type OZ wrench is used to remove OZ handle nut The knife handle wrench can...

Contact Now

Lathe Key Type Drill Chuck

• Brand: QFMH

• Packaging: carton

• Supply Ability: 5000

• Min. Order: 1 Piece/Pieces

Key Type Drill Chuck With Taper Fitting Blister Packing is connected with the tool is used to clamp the tool holder type tool accessories There are two connection ways threaded connections and taper connection According to the specifications of the chuck now specifications of the main thread of the 3 8 24UNF 1 2 20UNF...

Contact Now

CNC BT ER20 COLLET CHUCK TOOL HOLDER

• Brand: QFMH

• Packaging: carton

• Supply Ability: 5000

• Min. Order: 1 Piece/Pieces

Er20 tool holder material Titanium alloy 20CrMnTi wear resistant and durable Tool holder hardness 58 60 degrees low noise low wind resistance high repetitive clamping accuracy The commonly used specifications are bt30 BT40 and bt50 the length of which is er20 70 er20 100 and er20 150 BT TOOL HOLDER The clamping range...

Contact Now

HSK milling tool holder ER collet chuck

• Brand: QFMH

• Packaging: carton

• Supply Ability: 5000

• Min. Order: 1 Piece/Pieces

HSK milling tool holder ER collet chuck Inaddition choosing single edge boring cutter on NC machine tool can avoid scratching workpiece during tool withdrawal but attention should be paid to the position direction of tool tip relative to keyway on tool handle some machine tools require the same orientation as keyway...

Contact Now

SK straight power collet chuck tool holder

• Brand: QFMH

• Packaging: carton

• Supply Ability: 5000

• Min. Order: 1 Piece/Pieces

SK straight power collet chuck tool holder straight shank collet clamping tool for various sizes of cylindrical shank high speed and high precision machining The locking principle of powerful chuck tool holder Similar to the principle of ratchet bearing the needle rolling is thick in one direction on the conical...

Contact Now

NT Shank Side Lock End Mill Holder

• Brand: QFMH

• Packaging: carton

• Supply Ability: 5000

• Min. Order: 1 Piece/Pieces

NT Shank Side Lock End Mill Holder apply to the holder of a DIN1835 B with a solid surface of the cutting tool high speed and high precision machining Mechanical spindle and cutting tools and other accessories High Precision NT shank Tool Holder balanced G6 3 or G2 5 For choose Cnc Lathe Nt Tool Holder Specifications...

Contact Now

SK40 powerful collet chuck Cutting Tool Holder

• Brand: QFMH

• Packaging: carton

• Supply Ability: 5000

• Min. Order: 1 Piece/Pieces

SK40 powerful collet chuck Cutting Tool Holder straight shank collet clamping tool for various sizes of cylindrical shank high speed and high precision machining The locking principle of Spring Tool Holder Similar to the principle of ratchet bearing the needle rolling is thick in one direction on the conical surface...

Contact Now

CNC BT ER COLLET CHUCK TOOL HOLDER

• Brand: QFMH

• Packaging: carton

• Supply Ability: 5000

• Min. Order: 1 Piece/Pieces

BT ER COLLET CHUCK with DIN6499 can be used for clamping straight shank cutters with different sizes BT tool holder comes in a range of sizes designated as BT30 BT40 BT50 etc and uses the same NMTB body taper as CAT BT tooling is symmetrical with the spindle axis This gives BT tooling greater stability and balance at...

Contact Now

CNC NT Shank Drill Chuck Arbor

• Brand: QFMH

• Packaging: carton

• Supply Ability: 5000

• Min. Order: 1 Piece/Pieces

DIN2080 NT Drill Chuck Arbors The connecting rod is mainly used for drilling and milling machine used in drill chuck generally used for lathe milling machine machining center machine etc Drilling clamp for taper hole drill chuck taper hole self tightening chuck and tool holder Nt Shank Drill Chuck Arbor Specifications...

Contact Now

Cnc machine Key Type Drill Chuck

• Brand: QFMH

• Packaging: carton

• Supply Ability: 5000

• Min. Order: 1 Piece/Pieces

Cnc machine Key Type Drill Chuck Keytype Drill Chuck Application Recommended for light medium and heavy duty portable bench or floor mounted power tiils Taper hole connection are mainly B10 B12 B16 B18 B22 and JT0 JT2 JT3 JT6 JT10 JT33 and other specifications Threaded connection is mainly used for electric drill...

Contact Now

high precision HSK ER collet chuck

• Brand: QFMH

• Packaging: carton

• Supply Ability: 5000

• Min. Order: 1 Piece/Pieces

high precision HSK ER collet chuck HSK tool holder system is a new type of high speed short taper tool holder Its interface adopts the method of simultaneous positioning of taper and end face The tool holder is hollow the taper length is short and the taper is 1 10 which is conducive to realizing lightweight and high...

Contact Now

CNC Collet Chuck NT Pull Stud

• Brand: QFMH

• Packaging: carton

• Supply Ability: 5000

• Min. Order: 1 Piece/Pieces

CNC Collet Chuck NT Pull Stud One end of the pull stud is connected with the bayonet of the machine tool one end is connected with the handle and the d part is inserted in accordance with the degree of the machine bayonet The part is screwed and the handle is tightened The axial force transmitted through the pull rod...

Contact Now

Iso40 tool holder collet chuck

• Brand: QFMH

• Packaging: carton

• Supply Ability: 5000

• Min. Order: 1 Piece/Pieces

NT tool holder material Titanium alloy 20CrMnTi wear resistant and durable NT tool holder hardness 58 60 degrees low noise low wind resistance high repetitive clamping accuracy NT tool holder features 25000 35000 RPM high speed small CNC machining center engraving and milling machine plane profiling milling machine...

Contact Now

SK ER Collet Chuck Tool Holder

• Brand: QFMH

• Packaging: carton

• Supply Ability: 5000

• Min. Order: 1 Piece/Pieces

SK Collet Chuck Tool Holder DIN6499 collet clamping tool holder of various sizes high speed and high precision machining Mechanical spindle and cutting tools and other accessories High Precision SK shank Tool Holder balanced G6 3 or G2 5 For choose SK Tool Holders for mechanical spindle and cutting tool and other...

Contact Now

SK Ball Spanner SK Collet Chuck

• Brand: QFMH

• Packaging: carton

• Supply Ability: 5000

• Min. Order: 1 Piece/Pieces

SK Ball Spanner For SK Tool holder is used for screws leverage wrenching bolts nuts and other threaded fasteners tools SK Spanner Wrenches come in many forms such as Cnc Spanner have Metric combination wrench inch combination wrench metric double open end spanner inch double open end spanner metric double offset ring...

Contact Now

High accuracy ER collet chuck set

• Brand: QFMH

• Packaging: carton

• Supply Ability: 5000

• Min. Order: 1 Piece/Pieces

High accuracy ER collet ER collet chuck set The standard ER collet is the most widely used clamping tool in the world Made from Alloy spring steel and fully hardened the ER collets are ideal for many machining applications including boring milling reaming tapping and grinding High accuracy ER collet chuck set 1...

Contact Now

HSK63 Tool Holder ER Spring Collet Chuck

• Brand: QFMH

• Packaging: carton

• Supply Ability: 5000

• Min. Order: 1 Piece/Pieces

HSK63F Tool Holder ER Spring Collet Chuck HSK tool holder system is a new type of high speed short taper tool holder Its interface adopts the method of simultaneous positioning of taper and end face The tool holder is hollow the taper length is short and the taper is 1 10 which is conducive to realizing lightweight...

Contact Now

SK OZ Collet Chuck For Heavy Cutting

• Brand: QFMH

• Packaging: carton

• Supply Ability: 5000

• Min. Order: 1 Piece/Pieces

Collet chuck for SK30 SK40 SK50 OZ Series DIN6388 OZ collet clamping straight shank tools of various sizes straight shank collet clamping tool for various sizes of cylindrical shank high speed and high precision machining Mechanical spindle and cutting tools and other accessories High Precision SK shank Tool Holder...

Contact Now

HSK63A tool holder er collet chuck

• Brand: QFMH

• Packaging: carton

• Supply Ability: 5000

• Min. Order: 1 Piece/Pieces

HSK milling machine tool holder HSK63A er collet chuck Hska63 tool holder HSK tool holder system is a new type of high speed short taper tool holder Its interface adopts the method of simultaneous positioning of taper and end face The tool holder is hollow the taper length is short and the taper is 1 10 which is...

Contact Now

OZ Collet Chuck for SK Tool Holder

• Brand: QFMH

• Packaging: carton

• Supply Ability: 5000

• Min. Order: 1 Piece/Pieces

The hilt of the SK30 OZ25 speed for 24000R MIN applicable to the main shaft of the SK3O and is also suitable for similar woodworking machinery and equipment such as industry such as the long peace shoda brands such as CNC machine tool equipment the handle the special configuration of a screwdriver handle knife beam...

Contact Now

DIN2080 NT Shank Combi Shell End Mill Arbor

• Brand: QFMH

• Packaging: carton

• Supply Ability: 5000

• Min. Order: 1 Piece/Pieces

NT40 Combi Shell End Mill Arbor is suitable for the use of the axial or radial drive groove of the milling cutter such as vertical disc cutter sets of type of milling cutter face milling cutter milling cutter three face milling cutter Mechanical spindle and cutting tools and other accessories High Precision NT shank...

Contact Now