It is very important to choose the right diameter of spring collet

Spring Collet is one of the parts of machine tool. It plays an important role in the whole system operation process. Although a part can not determine the overall performance, it can give full play to the performance of the equipment better with this collet. Professional spring collet manufacturers can customize collets of various specifications and sizes according to different needs. When mass customization is carried out, as long as You can provide the corresponding technical parameters, we can according to the precise size, produce the high-quality products you need.

The planning and service of spring collet is a very wide field, which is in urgent need of responding to the plumpness of various beds, as well as including the commodities planned to reflect the different styles and properties of the collet and the machine tool. For some reasons, the total number has been quite a few. But now there is a broad misconception that spring chuck is only used to clamp cylindrical casting semi-finished products. This is not true. In fact, it can be used for anchoring and clamping almost any shape of workpiece (or cutter), including square or hexagon workpiece.

It is necessary to select the proper diameter of the spring collet, so as to control the spring collet's support to the casting. As long as the nominal hole diameter of the spring collet is too large, the casting is clamped by a pair of holes of the spring collet, which will arouse many shape mismatches between the outer circle of the casting and the inner hole of the spring collet, thus reducing the clamping force. For example, if the nominal hole diameter option of the chuck is too small, only the head magnetic deflection angle is contacted with the casting, relatively speaking, the clamping force is superposed, but the chuck and the workpiece are not the same subject matter. In a proper size, it can be used to expand clamping and solidify the parts with the same nominal diameter.