Practical guidelines for toolholder maintenance

May 19, 2022

1. Regularly clean all accessories and spare parts, tool handle (handle and head) and spindle. When not in use, apply a layer of oil to prevent oxidation.

2. Regularly remove the Graflex or capto assembly for cleaning and inspection.

3. Store the tool handle in a clean and dry place.

4. Visually check the wear of the tool handle, such as the trace of fretting corrosion. At the same time, check all accessories and spare parts visually: bushing, spindle pull pin, nut, etc., and replace them if necessary.

5. Always use specific installation and removal equipment, such as the toolbox unloader.

6. Do not overtighten the screw, and do not exceed its given torque limit. The wrench cannot be clamped without torque screws.

7. Do not exceed the recommended screw revolutions of the hydraulic clamping system. Regularly regulate the pressure of the hydraulic chuck with calibration instrument.

8. Do not let the fixture overheat.

The above is the Practical guidelines for toolholder maintenance we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Previou:How to choose CNC milling cutter?

Next:Knowledge of machining center toolholder