What should be paid attention to in the process of using spring collet?

July 05, 2021

In order to make the Spring Collet can be used stably for a long time, it is necessary to use the collet with the correct method, because if the wrong method is chosen, the damage to the spring collet is still great, so I hope everyone can master the correct method of using the spring collet, Now let's explain in detail what problems should be paid attention to in the process of using the collet. I hope you can know more about it.

In the process of purchasing its spring collet, we need to purchase according to the relevant specifications, in order to process the product well. The choice of chuck is an indispensable item for the spindle. Only by fixing the product well with the chuck can the quality and accuracy be guaranteed. Read the above introduction, I believe you have a general understanding of the use of collet, of course, the detailed use of choice or to learn in the operation.

In the process of using the spring collet, we must ensure that the collet and the spindle can be well linked, but also ensure that it can achieve accurate connection in the process of linking. There are some standards for the specifications of the collet. Remember to meet the standards when making the collet, so that the collet can work normally and there will be no error when processing the product. If the chuck is used to produce molded parts and the like, these products are easy to be deformed by heat, so it is better to use the standard claw chuck for the chuck. If it is cold-rolled material parts, it is not easy to have size changes, this is more suitable for spring collet.

In the process of using the spring collet, only by ensuring the good contact between the spindle and the collet, the phenomenon of loose connection will not appear, and the high concentricity can be ensured. The chuck is made of standard structure, which can be connected with many spindles. Before installing the collet, install the spring collet into the lock nut, and then gently screw the lock nut with the spring collet onto the handle, extension rod or spindle. Be sure to clean the thread part, locating surface and cone surface of chuck and lock nut.

The above is the What should be paid attention to in the process of using spring collet? we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Previou:What is the effective way to choose the right spring collet?

Next:What should we pay special attention to when choosing a good spring collet?