The machine processing industry is so widely used. Have you chosen the right spring collet?

As an important tool to fix the contact between the spindle and the parts, the Spring Collet ensures the stability when the machine and equipment are processing the products. In order to enable the bullet and other headers to be used for a long time, we should find the bullet and other headers that can be reasonably used and purchased

The specific methods of use and purchase are as follows:

1. In the process of using the spring collet, only by ensuring the good contact between the spindle and the collet, the connection will not be insecure, and a high concentricity can be guaranteed. The collet is made with standard

It is made of a standard structure and can be connected with many spindles when in use. Before installing the spring collet, the spring clamp must be installed into the lock nut, and then the pin nut with the spring collet shall be gently controlled on the tool handle.

Extension rod or spindle. Be sure to clean the thread part, locating surface and cone surface of spring collet and lock nut.

2. In the process of purchasing spring collets, you need to purchase according to the relevant specifications in order to process the products well. The selection of collet is an indispensable connecting part for the spindle, and only the collet is good

The quality and accuracy can be guaranteed only when the product is fixed and processed.

3. In the process of using the spring collet, it must be ensured that the collet and the spindle can be well connected, and that it can achieve accurate connection in the process of linking. The specification of the collet has a certain standard. When making the collet, it must meet the standard, so that the produced collet can work normally, and there will be no error when processing the product. If the materials used for the production of the chuck are molded parts and the like, these products are easy to be deformed by heat, so it is better to use standard jaws to grasp the chuck. If it is a cold rolled material part, it is not easy to have dimensional changes, which is more suitable for using spring collets.