What is the application of spring collet?

In the practical application of spring chuck, if the scale of the workpiece is more cooperative, the processing speed of the application chuck will be slower and slower. If the change of workpiece size is relatively small, it may be more appropriate to use jaw chuck. The types of grinding materials such as hot rolled steel, forgings and moulded parts, the standard jaw chuck is often more and more limited, because the parts of this kind of materials are difficult to have relatively small size changes caused by cold deformation.

The clamping structure of spring chuck is very important for metal workpiece machine, especially for bar automatic machine. However, some of their parts are often damaged, so the strike probability caused by the clamping organization of Turing machine is often very small. Therefore, among all the parts of the clamping group, the spring chuck is a key machine tool accessory. It is practiced under slight motion conditions and determines the accuracy of grinding. Therefore, it is very important to confirm the basic parameters of the collet (the number of lobes, the cone angle, the length of jaws and lobes) for the working ability of the collet. Therefore, the cold rolled material parts also have poor dimensional commonality, so it is suitable to use the tension spring clamp. In addition, the parts of non-circular blank can also be clamped by Spring Collet. The collet used by designers as non-circular cross section can be obtained to clamp the molded bar with the shape required by customers.

It is practiced under slight motion conditions and determines the accuracy of grinding. Therefore, it is very important to confirm the basic parameters of the collet (the number of lobes, the cone angle, the length of jaws and lobes) for the working ability of the collet. Therefore, the cold rolled material parts also have poor dimensional commonality, so it is suitable to use the tension spring clamp. In addition, the parts of non-circular blank can also be clamped by spring collet. The collet used by designers as non-circular cross section can be obtained to clamp the molded bar with the shape required by customers.