Which industries are CNC lathe chuck used in

Production process of CNC chuck: in the process of use, first, pour the chuck into the pressure cap, gently operate the clamp spring, wait for the eccentric part of the pressure cap to be concave into the groove of the retaining ring, locate along the arrow, evenly and forcefully carry out the clamping spring, that is, it can taper two halves. The ER chuck only needs to transfer the sliding sleeve, so that the drilling and tapping sleeve can be reliably replaced. When drilling, the Morse sleeve can be found by itself; when tapping, the torque can be carried smoothly to prevent the tap from being in two. In addition, when changing the tool, loosen the pressure cap with a spanner, take out the collet and the cutter, remove the cutter, position it along the arrow, and then put on the clip with various aperture according to the limit. The adjustability of the chuck structure of CNC lathe often depends on the principle of bolt fastening and pin position. When adjusting and arranging the fixture, it can easily grind a certain circuit length.

The clamping force ratio of CNC chuck is many, and the clamping range is relatively wide, and also obtained high precision, so it is widely used in a light industry, such as the use of machine tool light industry, compared with ER chuck, it has different types, and different collets are applied to different levels. It obtains high precision, can locate the parts reliably in a certain position, plays an important role for the smooth production of goods, and also improves the production efficiency of goods. CNC chuck should pay attention to the surface maintenance of equipment, it directly affects the surface quality of goods, the core is to treat corrosion, so it is very important to select the same suitable, excellent and professional antirust oil. CNC chuck is common in machine tools, which is irreplaceable nowadays. It is widely used, safe but easy to harm, so the consumption is huge. According to the different materials of CNC chuck, the limited heat treatment methods are different, and the hardness requirements of different parts of CNC chuck are different.