Communicate with Supplier? Supplier
jiames.wang Mr. jiames.wang
What can I do for you?
Chat Now Contact Supplier

JINING QINFENG MACHINERY HARDWARE CO.,LTD

Bt Pull Studs - manufacturer, factory, supplier from China

(Total 24 Products for Bt Pull Studs)

  • 45 Degree BT pull stud

    45 Degree BT pull stud

    • Brand: QFMH

    • Packaging: carton

    • Supply Ability: 5000

    • Min. Order: 1 Piece/Pieces

    HIgh Quality BT Pull studs 45 Degree pull studs Morse BT30 40 50 pull stud Deep cooling treatment and thermal aging treatment can reduce residual stress and improve durability and accuracy stability Adopt surface coating technology to improve the anti wear ability of the surface better anti rust and anti corrosion...

    Contact Now

  • BT40 APU Drill Chuck Keyless drill chuck

    BT40 APU Drill Chuck Keyless drill chuck

    • Brand: QFMH

    • Packaging: carton

    • Supply Ability: 5000

    • Min. Order: 1 Piece/Pieces

    BT40 APU Drill Chuck Keyless drill chuck BT APU drill chuck There are five common types of tool holder for BT40 drill chuck the clamping range of BT40 APU8 85 is 0 5mm 8mm the clamping range of BT40 APU13 105 is 1mm 13mm the clamping range of BT40 APU13 130 is 1mm 13mm the clamping range of BT40 APU16 105 is 3mm 16mm...

    Contact Now

  • BT40 powerfull milling collet chuck

    BT40 powerfull milling collet chuck

    • Brand: QFMH

    • Packaging: carton

    • Supply Ability: 5000

    • Min. Order: 1 Piece/Pieces

    BT40 powerfull milling collet chuck The structure design technology of powerful BT tool holder is advanced In the protection ring of BT Tool holder more needles are put into it than other similar products The needle is made of special steel and will never be deformed Because the needle is arranged tightly the needle...

    Contact Now

  • BT50 Face Milling Holder CNC Tool Holder

    BT50 Face Milling Holder CNC Tool Holder

    • Brand: QFMH

    • Packaging: carton

    • Supply Ability: 5000

    • Min. Order: 1 Piece/Pieces

    BT50 Face Milling Holder CNC Tool Holder Cooperate with all kinds of the knife dish is suitable for the gantry NC milling machine and general plane processing Hole is beneficial to the water and strong vibration resistance The diameter clamping range is 0 5 16mm bit Mechanical spindle and cutting tools and other...

    Contact Now

  • BT40 End Mill Holder Weldon Collet Chuck

    BT40 End Mill Holder Weldon Collet Chuck

    • Brand: QFMH

    • Packaging: carton

    • Supply Ability: 5000

    • Min. Order: 1 Piece/Pieces

    BT40 End Mill Holder Weldon Collet Chuck The Mega Perfect Grip is a highly accurate milling tool holder with fully concentric clamping with runout less than 0004 4xD It accepts industry standard Weldon flat milling cutters ASME B94 19 1997 and no special grinding of the milling cutter is required A unique lock...

    Contact Now

  • BT40 ER Collet Chuck CNC Tool Holder

    BT40 ER Collet Chuck CNC Tool Holder

    • Brand: QFMH

    • Packaging: carton

    • Supply Ability: 5000

    • Min. Order: 1 Piece/Pieces

    BT40 ER Collet Chuck CNC Tool Holder BT Tool Holders for mechanical spindle and cutting tool and other accessory tool connection Is a simple popular spindle shank connection standard mainly BT30 BT40 BT50 Etc Mold industry and high speed engraving machine used more Er tool holder is a kind of numerical control tool...

    Contact Now

  • Pull stud by SK standard

    Pull stud by SK standard

    • Brand: QFMH

    • Packaging: carton

    • Supply Ability: 5000

    • Min. Order: 1 Piece/Pieces

    Pull stud by SK standard Pull studs of minor quality not only decrease the performance of the machine they are even a safety risk A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons Carburization pull stud make of high quality steel Carburizing and quenching process of...

    Contact Now

  • BT pull stud 45  60 90

    BT pull stud 45 60 90

    • Brand: QFMH

    • Packaging: carton

    • Supply Ability: 5000

    • Min. Order: 1 Piece/Pieces

    BT pull stud Deep cooling treatment and thermal aging treatment can reduce residual stress and improve durability and accuracy stability Adopt surface coating technology to improve the anti wear ability of the surface better anti rust and anti corrosion effect more stable accuracy smoother surface and more beautiful...

    Contact Now

  • SK sealing Pull stud 45° 60° 90°

    SK sealing Pull stud 45° 60° 90°

    • Brand: QFMH

    • Packaging: carton

    • Supply Ability: 5000

    • Min. Order: 1 Piece/Pieces

    SK sealing Pull stud 45 60 90 of minor quality not only decrease the performance of the machine they are even a safety risk A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons SK Pull stud Product introduction 1 SK Pull stud Material 20CrMnTi 2 SK Pull stud Carburizing...

    Contact Now

  • CAT Pull stud CAT tool holder

    CAT Pull stud CAT tool holder

    • Brand: QFMH

    • Packaging: carton

    • Supply Ability: 5000

    • Min. Order: 1 Piece/Pieces

    High Precision CAT CNC pull stud has 45 degrees 60 degrees and 90 degrees which belongs to American thread pull screw Mainly used in CNC numerical control machine tool 50 taper handle CNC tool holder pull stud is made of high quality steel 20CrMnTi CNC pull stud According to different uses the hardness HRC is between...

    Contact Now

  • High Precision BT30-ER16 CNC Tool shank

    High Precision BT30-ER16 CNC Tool shank

    • Brand: QFMH

    • Packaging: carton

    • Supply Ability: 5000

    • Min. Order: 1 Piece/Pieces

    High Precision Coated BT30 ER16 CNC Tool shank BT Tool Holders for mechanical spindle and cutting tool and other accessory tool connection Is a simple popular spindle shank connection standard mainly BT30 BT40 BT50 Etc Mold industry and high speed engraving machine used more Er tool holder is a kind of numerical...

    Contact Now

  • BT40 Pull Studs for BT shank holder

    BT40 Pull Studs for BT shank holder

    • Brand: QFMH

    • Packaging: carton

    • Supply Ability: 5000

    • Min. Order: 1 Piece/Pieces

    BT30 Pull Stud for BT shank holder Pull stud of minor quality not only decrease the performance of the machine they are even a safety risk A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons BT Pull Stud Material 20CrMnTi BT Pull Stud Carburization depth 0 8 Cnc Pull...

    Contact Now

  • DIN2080 NT40 tool holder Pull Stud

    DIN2080 NT40 tool holder Pull Stud

    • Brand: QFMH

    • Packaging: carton

    • Supply Ability: 5000

    • Min. Order: 1 Piece/Pieces

    High quality Retention Knob for DIN2080 NT40 tool holder Pull Stud One end of the NT pull stud is connected with the bayonet of the machine tool one end is connected with the tool holder and the d part is inserted in accordance with the degree of the machine bayonet The g part is screwed and the handle is tightened...

    Contact Now

  • BT ER spring chuck tool holder

    BT ER spring chuck tool holder

    • Brand: QFMH

    • Packaging: carton

    • Supply Ability: 5000

    • Min. Order: 1 Piece/Pieces

    The tool holder shank intermediate connecting rod and tool can be assembled outside the machine tool and then loaded into the tool library of the machining center According to the different ways of clamping tool the tool holder can be divided into side fixed end mill tool holder spring chuck tool holder heat...

    Contact Now

  • BT side lock end mill holder milling cutter

    BT side lock end mill holder milling cutter

    • Brand: QFMH

    • Packaging: carton

    • Supply Ability: 5000

    • Min. Order: 1 Piece/Pieces

    The body of BT side fixed end milling cutter rod is made of SCM 21 steel After heat treatment HRC58 degree and high precision grinding the thread is precisely grinded Specifications and models are complete BT30 SLN6 8 10 12 16 20 25 BT40 SLN6 8 10 12 16 20 25 32 BT50 SLN6 8 10 12 16 16 20 25 32 Applicable to CNC...

    Contact Now

  • SK Pull Stud for DIN69871 Tool Holder

    SK Pull Stud for DIN69871 Tool Holder

    • Brand: QFMH

    • Packaging: carton

    • Supply Ability: 5000

    • Min. Order: 1 Piece/Pieces

    SK Pull Stud for DIN69871 Tool Holder Pull stud 45 60 90 of minor quality not only decrease the performance of the machine they are even a safety risk A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons SK Pull stud Product introduction 1 Type BT DIN ISO CAT40 MAS JIS...

    Contact Now

  • SK Pull Stud With Standard DIN 69872

    SK Pull Stud With Standard DIN 69872

    • Brand: QFMH

    • Packaging: carton

    • Supply Ability: 5000

    • Min. Order: 1 Piece/Pieces

    SK Pull Stud With Standard DIN 69872 Pull studs of minor quality not only decrease the performance of the machine they are even a safety risk A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons SK Pull Stud Specifications 1 SK Pull Stud material alloy steel 2 SK Pull...

    Contact Now

  • BT40 Powerful milling toool holder

    BT40 Powerful milling toool holder

    • Brand: QFMH

    • Packaging: carton

    • Supply Ability: 5000

    • Min. Order: 1 Piece/Pieces

    BT40 Powerful milling toool holder The structure design technology of powerful BT tool holder is advanced In the protection ring of BT Tool holder more needles are put into it than other similar products The needle is made of special steel and will never be deformed Because the needle is arranged tightly the needle...

    Contact Now

  • BT powerful tool holder

    BT powerful tool holder

    • Brand: QFMH

    • Packaging: carton

    • Supply Ability: 5000

    • Min. Order: 1 Piece/Pieces

    powerful BT tool holder material using titanium alloy 20CrMnTi wear resistant and durable BT Tool holder hardness 58 60 degrees low noise low wind resistance high repetitive clamping accuracy BT Tool holder features high rigidity strong clamping force chuck thickening design can increase rigidity bear heavy cutting of...

    Contact Now

  • High Precision CAT pull stud

    High Precision CAT pull stud

    • Brand: QFMH

    • Packaging: carton

    • Supply Ability: 5000

    • Min. Order: 1 Piece/Pieces

    High Precision CAT CNC pull stud has 45 degrees 60 degrees and 90 degrees which belongs to American thread pull screw Mainly used in CNC numerical control machine tool 50 taper handle CNC tool holder pull stud is made of high quality steel 20CrMnTi CNC pull stud According to different uses the hardness HRC is between...

    Contact Now

  • Stainless steel BT pull stud

    Stainless steel BT pull stud

    • Brand: QFMH

    • Packaging: carton

    • Supply Ability: 5000

    • Min. Order: 1 Piece/Pieces

    Stainless steel BT pull stud is also called a rod shaped part with a cap at one end of the metal After penetrating into the connected component it strikes and extrudes the other end of the rod to press and fix the component Stainless steel BT pull stud will not cause corrosion pitting rust or wear Stainless steel BT...

    Contact Now

  • BT40 MLC32 power tool holder milling chuck

    BT40 MLC32 power tool holder milling chuck

    • Brand: QFMH

    • Packaging: carton

    • Supply Ability: 5000

    • Min. Order: 1 Piece/Pieces

    BT40 MLC32 135 power tool holder milling chuck The structure design technology of powerful BT tool holder is advanced In the protection ring of BT Tool holder more needles are put into it than other similar products The needle is made of special steel and will never be deformed Because the needle is arranged tightly...

    Contact Now

  • CNC Milling Tool Holder NT40 Pull Stud

    CNC Milling Tool Holder NT40 Pull Stud

    • Brand: QFMH

    • Packaging: carton

    • Supply Ability: 5000

    • Min. Order: 1 Piece/Pieces

    CNC Milling Spindle Tool Holder NT Pull Stud One end of the CNC pull stud is connected with the bayonet of the machine tool one end is connected with the tool holder and the dpart is inserted in accordance with the degree of the machine bayonet The g part is screwed and the handle is tightened The axial force...

    Contact Now

  • Drill chuck arbors CNC BT collect chuck adapter

    Drill chuck arbors CNC BT collect chuck adapter

    • Brand: QFMH

    • Packaging: carton

    • Supply Ability: 5000

    • Min. Order: 1 Piece/Pieces

    Drill chuck arbors CNC lathe BT collect chuck adapter The connecting rod is mainly used for drilling and milling machine used in drill chuck BT Drill Chuck Arbor generally used for lathe milling machine machining center machine etc BT Drill Chuck Arbor Connecting rod using the alloy structure steel the hardness...

    Contact Now

Review

Kara Milburn

Nov 16, 2019 5

Great Price
Danial Azami

Nov 15, 2019 4

It feels good. fits the description. long time coming
Raefat Soryal

Nov 14, 2019 4

The Bt Pull Studs is excellent. Will come back to buy again.
  • Related Information
Our rewards are lower costs,dynamic profits team,specialised QC,potent factories,high-quality services for Bt Pull Studs , Bt Pull Stud , BT Pull Studs , We sincerely welcome overseas consumers to consult for your long-term cooperation as well as the mutual advancement.We strongly think that we will do superior and far better.
"""Control the quality by the details, show the power by quality"". Our enterprise has strived to establish a remarkably efficient and stable team team and explored an effective excellent control system for Bt Pull Studs , Bt Pull Stud , BT Pull Studs , Our market share of our products has greatly increased yearly. If you are interested in any of our products or would like to discuss a custom order please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future. We are looking forward to your inquiry and order.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Send Inquiry

jiames.wang

Mr. jiames.wang

Email:

info@qfmh.com

Send Inquiry

Tel:86-0537-3281595

Fax:86-0537-3281597

Mobile Phone:+8613705473076Contact me with Whatsapp

Email:info@qfmh.com

Address:ROOM C-911,9/F.,ZHICHENG INTERNATIONAL CENTRE, , Jining, Shandong

Mobile Site

http://www.qftoolholder.com