DIN69893 HSK Tool holder ER Collet Chuck

DIN69893 Hsk Tool Holder Er Collet Chuck ,Hsk Tool Holders are available in A, B, C, D, E, F and other specifications, which are often used in machining centers (automatic tool change) There are types A, E and F. The biggest differences between A and E are: 1. Type A has a drive slot and type E does not. Therefore, the A-type transmission torque is relatively large, and some heavy cutting can be performed. While E The torque transmitted by the model is relatively small, and only some light cutting can be performed. 2. In addition to the drive grooves on the A-type shank, there are manual fixing holes, direction grooves, etc., so the balance is relatively poor. While E There is no type, so E type is more suitable for high speed processing. The E-type and F-type mechanisms are completely the same. The differences are: Also called E-type and F-type tool holders (such as E63 and F63), the taper of the F-type TOOL HOLDER is one size smaller. That is E63 and F63 The flange diameters are all φ63, but the size of the cone of F63 is only the same as that of E50.

Hsk Er Collet Chuck Specifications 
1.Products name:HSK ER Collet Chuck Tool Holder
2.Model Number:HSK30,HSK40,HSK50
3.Application:milling Tool Holder for CNC Routers
4.Material:Stainless steel
5.Standard:DIN69893
6.Hardness:HRC58±2mm
7.Rotating speed:G2.5 30000rpm
8.Runout:within 5 μm
9.Surface Roughness:Ra<0.25μm
10.Taper cone: 11.Carburizing:0.8mm
12.Payment:TT/paypal/western union/trade assurance/visa/e-check
13.Supply Ability:30000 Piece/Pieces per Month HSK50E ER16 Tool Holder
Packaging Details:
1.Film inside-plastic box-carton-pallet
2.According to your request
Port:Qingdao,Tianjin,Shanghai
Lead Time :Usually in stock, ship immediately after payment..