Careful inspection before application of CNC lathe ER collet chuck

Cnc Lathe Collet Chuck manufacturing method: first of all, add the chuck into the pressure cap, gently run the chuck spring, waiting for the eccentric layout of the pressure cap to concave into the chuck spring groove, along the arrow target fixed and vigorously promote the chuck spring, it can cone two and a half. The ER chuck only needs to move to the slip sleeve, so that the drilling and tapping sleeves can be changed at high speed. When drilling, the Morse sleeve is locked automatically; when tapping, the torque can be stabilized and slippery with the same load, avoiding the two halves of the tap. In addition, when changing the cutter, release the clamp and the cutter with the wrench to relax the pressure cap, remove the cutter, and promote the clip spring along the arrow target, so that it can withdraw, and then replace the clip spring with other apertures as needed. The adjustability of NC lathe chuck is often decided by the way of bolt fastening and pin position. When fixture is arranged and arranged, the length of a circuit can be repaired more slowly.

The clamping force of CNC lathe Er Collet Chuck is relatively large, and the clamping range is relatively wide, and it also obtains high precision. Therefore, it has been widely used in a profession, such as in machine tool profession. Compared with ER chuck, it has different kinds, and the non-example chuck has been applied in different levels. It achieves high precision, can locate the workpiece in a certain position at high speed, plays an important role in the smooth production of products, and also increases the production efficiency of products. CNC chuck should pay attention to the overall maintenance of props. It directly affects the overall quality of the product. The key is to treat rust. Therefore, it is very important to select an appropriate, high-quality and effective rust-proof oil. CNC lathe chuck is a common machine tool in the present is irreplaceable equipment, the application scope is particularly popular, fast but easy to destroy, because this consumption is also huge. According to the material of the numerical control chuck is different, the way of heat treatment is also different, the relative hardness limitation of the numerical control chuck is also different in different places.