In some mold manufacturing industry and hardware machinery industry, the knife handle is an indispensable tool. There are many kinds of tool handles in the world, and each kind of tool handle is different. According to the clamping type, it can be divided into hydraulic tool handle, profit tightening tool handle, general tool handle and heat shrinkable tool handle. As many users always say that they can only use it. They don't quite understand what the principle is. It's necessary to master some basic use methods. Today, Shandong shenganbei new energy Co., Ltd. will explain the use methods of two types of knife handles to you. Usage of common TOOL HOLDER: 1. Put the Tool Holder into the tool unloading seat and lock it; 2. Select the appropriate circlip according to the tool diameter and ensure that the working surface is clean; 3. Install the snap ring into the lock nut; 4. Insert the milling cutter into the circlip hole and control the extension length of the cutter according to the machining depth; 5. Lock the lock nut with a wrench; 6. Install the tool handle onto the main shaft;
Usage of hydraulic tool holder:
1. Clean the protective oil on the hydraulic collet before use. 2. Loosen the piston clamping screw and insert the tool into the hole until it contacts the thrust pin. 3. Use a wrench to adjust the tool length through the radial positioning adjusting screw or axial adjusting screw. 4. After the length is set, tighten the piston clamping screw to use.
