What should we pay attention to when using the tool holder

I. When choosing products TOOL HOLDER

1. Check the size and shape of spindle hole and tool handle.

2. Choose cutting tools with appropriate size and shape and matching with tool shank.

3. Choose appropriate cutting conditions.

2. When handling products Tool Holder

1. When transporting products and removing products from boxes, pay attention to avoid products popping up or falling.

2. Care must be taken when handling multiple packaged products or heavy tool holders at the same time.

3. No attempt shall be made to modify or disassemble the handle.

4. Note that no scratches, scratches, debris or rust can be found on the parts of the handle and the base of the knife.

5. Do not touch the threaded part.

III. Installation of Cutting Tools tool holder

1. When installing cutting tools in the handle, please wear protective equipment.

2. When installing cutting tools in the tool shank, ensure absolute fixity.

IV. Installation to Machine Tools tool holder

1. When installing the tool handle, ensure that there is no dust on the machine spindle hole, the tool handle or the tool seat. Scratches, or rusts.

2. Check the accuracy of eccentric grip regularly.

3. Pulling nails are consumables and should be replaced regularly.

V. Processing Time tool holder

1. Do not touch the handle when rotating.

2. Machinery shall not be operated when cutting tools are not installed in the tool shank.

3. Be careful not to rotate backwards.

4. Protective shield and goggles should be worn during processing.

5. When setting high-pressure coolant for processing applications, the hand or body should not be close to the cutting tool tip.