Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Milling NT APU keyless drill chuck holder
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:NT30,NT40,NT50
Packaging: carton
Supply Ability:5000
Milling machine NT APU keyless drill chuck holder , Application range: clip diameter: 0.5-16mm bit .Mechanical spindle and cutting tools and other accessories.High Precision NT shank Tool Holder ,balanced G6.3 or G2.5 For choose. -- NT APU Drill...
ER collets sealed collet for milling machine
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:ER8,ER11,ER16,ER20,ER25,ER32,ER40
Packaging: carton
Supply Ability:5000
ER collets with sealed collets for CNC milling machine ,ER Sealed Collet Fine grinding inside and outside, chamfering design of inner hole, step design of barrel chuck appearance; The tool installation and removal are reasonable and convenient, and...
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:ER8,ER11,ER16,ER20,ER25,ER32,ER40
Packaging: carton
Supply Ability:5000
ER Sealed Collet with ERS32 ,CNC Tool Holder Collet ,Modle no.ER16C,ER20C,ER25C,ER32C,ER40C.ER COLLET Taiwan's process is stable and reliable. The inner circle and outer cone have an accuracy of 0.008mm. They are widely used for milling, drilling,...
ER sealed collet with water stop ring
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:ER8,ER11,ER16,ER20,ER25,ER32,ER40
Packaging: carton
Supply Ability:5000
ER sealed collet with water stop ring Accuracy 0.008mm,Precision collet Large clamping force, wide clamping range, 65Mn material, higher strength after heat treatment and cold drawing hardening, with a certain degree of flexibility and plasticity....
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:ER11,ER16,ER20,ER25,ER32,ER40
Packaging: carton
Supply Ability:5000
ER32 sealing coolant collet ,20 slot design to increase the number of elastic groove, shrinkage of 0.5mm, clamping force increases to increase the sealing,Material:SUJ2 High-carbon bearing steel (After heat treatment, it has rigid hardness and...
cnc tool holder NT APU drill chuck
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:NT30,NT40,NT50
Packaging: carton
Supply Ability:5000
High precision cnc tool holder DIN2080 NT APU drill chuck , Application range: clip diameter: 0.5-16mm bit .Mechanical spindle and cutting tools and other accessories.High Precision NT shank Tool Holder ,balanced G6.3 or G2.5 For choose. -- NT Drill...
High Precision ER Sealed Collet
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:ER8, ER11, ER16, ER20, ER25, ER32, ER40, ER50
Packaging: carton
Supply Ability:5000
The standard ER / C Watertight collet (internal cooling type),Precision collet is the most widely used clamping tool in the world.ER Sealed Collet Made from Alloy spring steel and fully hardened,the ER Sealed Collet are ideal for many machining...
SK Side Lock Tool Holder cnc tool
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:SK30,SK40,SK50
Packaging: carton
Supply Ability:5000
SK END MILL HOLDER ,SK Side Lock Tool Holder ,The side fixed tool handle holds the boring cutter. The biggest characteristics are: A. High precision B. Large clamping force C. Good rigidity D. Strong directivity SK Side Lock Tool Holder cnc tool...
SK Side Lock End Mill Tool Holder
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:SK30,SK40,SK50
Packaging: carton
Supply Ability:5000
Cnc SK Side Lock End Mill Tool Holder, Side fixed tool handle: It refers to the tool whose handle is flattened. It is generally used for installing quick drills. Advantages: high clamping degree and concentricity, commonly used to connect thread...
SK End Mill Holder Weldon Holder
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:SK30,SK40,SK50
Packaging: carton
Supply Ability:5000
Cnc SK Milling End Mill Tool Holder, apply to the holder of a DIN1835-B with a solid surface of the cutting tool, high speed and high precision machining .Mechanical spindle and cutting tools and other accessories.High Precision SK shank Tool Holder...
NT APU drill chuck for cnc drilling
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:NT30,NT40,NT50
Packaging: carton
Supply Ability:5000
NT APU drill chuck for cnc drilling, Application range: clip diameter: 0.5-16mm bit .Mechanical spindle and cutting tools and other accessories.High Precision NT shank Tool Holder ,balanced G6.3 or G2.5 For choose. Specification: 1.NT APU drill...
high precision DIN2080 NT APU drill chuck
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:NT30,NT40,NT50
Packaging: carton
Supply Ability:5000
high precision DIN2080 NT APU drill chuck, Application range: clip diameter: 0.5-16mm bit .Mechanical spindle and cutting tools and other accessories.High Precision NT shank Tool Holder ,balanced G6.3 or G2.5 For choose. Specification: 1.NT APU...
NT Standard Morse Taper Adapter With Drawbar
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:NT30,NT40,NT50
Packaging: carton
Supply Ability:5000
NT Standard Morse Taper Adapter With Drawbar ,The tool holder is used for Morse's flat tailless backward pulling tools, milling cutters and reamers,Nt30-mtb2, nt30-mtb3 and nt40-mtb4 can only be locked with an extended pull rod, and other...
CNC NT Morse Taper Adapter with Drawbar
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:NT30,NT40,NT50
Packaging: carton
Supply Ability:5000
NT Morse Taper Adapter MTB Collet Chuck with Drawbar,The internal thread hole and the rear end face of the toolholder are formed by one-time processing with the NC lathe, and the tolerance grade of the external cone is at3 (use the air momentum...
Lathe Accessories Morse Taper Adapter NT Tool Holder
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:NT30,NT40,NT50
Packaging: carton
Supply Ability:5000
Lathe Accessories Morse Taper Adapter NT Tool Holder,The raw material is 40Cr high carbon steel, and the blackened part is finely ground. The tool shank has stable performance and long service life. It improves the hardness of the tool shank, and...
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:NT30,NT40,NT50
Packaging: carton
Supply Ability:5000
DIN2080 end mill holders Weldon Holder, The side locking screws are used to clamp the NT tool shank of the tool, the straight shank boring bar with flat part, and the boring bar head for small hole processing with straight shank with flat part....
Collet Chuck Holder NT Face Milling Holder
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:NT30,NT40,NT50
Packaging: carton
Supply Ability:5000
Collet Chuck Holder NT Face Milling Holder , Tool holder used in the clamping of the cutter with the radial drive groove, such as the face milling cutter, the vertical disc cutter, the set type end mill, high speed and high precision machining...
DIN6357 NT FMB Face Mill Tool Holder
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:NT30,NT40,NT50
Packaging: carton
Supply Ability:5000
DIN6357 NT FMB Face Mill Tool Holder used in the clamping of the cutter with the radial drive groove, such as the face milling cutter, the vertical disc cutter, the set type end mill, high speed and high precision machining .Mechanical spindle and...
Precision Medium Duty Live Centre Toolholder
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:MT2,MT3,MT4,MT5
Packaging: carton
Supply Ability:5000
Medium Duty Live Centre Machine Accessories, Medium Duty Live Center MT2 / 3 / 4 / 5 / 6, high precision deep groove ball bearing, forged piece 40Cr, main body characteristic quenching hardness hrc45 ~ 48 carbon tool steel T10, pointed shaft...
Extended Medium duty live centre
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:MT2,MT3,MT4,MT5
Packaging: carton
Supply Ability:5000
We supply a series of products such as precision Medium Duty Live Centre, precision heavy-duty Live Centre ,precision outer rotating centers , and end surface fluctuation centers. The main body is made of 40Cr material, with a quenching hardness of...
CNC Tapping High Precision Medium Duty Live Centre
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:MT2,MT3,MT4,MT5
Packaging: carton
Supply Ability:5000
CNC Tapping High Precision Medium Duty Live Centre,live centres built in high-precision bearing, the appearance is high-precision fine grinding, and the Morse taper meets the gb1443-85 standard. It can be widely used for various lathes and main...
MT3 MT4 lathe Medium Duty Live Centre
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:MT2,MT3,MT4,MT5
Packaging: carton
Supply Ability:5000
MT3 MT4 lathe Medium Duty Live Centre , Live Center built in three rows of bearings, stable accuracy of 0.005mm, heat treatment of the center head HRC60 ° ± 2 °, high-precision cylindrical grinding of the cone handle, 40Cr forging heat treatment...
MT3 MEDIUM DUTY LIVE CENTER CNC Live Centre
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:MT2,MT3,MT4,MT5
Packaging: carton
Supply Ability:5000
MT3 MEDIUM DUTY LIVE CENTRE CNC Live Center , It is made of alloy steel with high wear resistance and heat resistance. It has good strength and hardness at high temperature. It is isolated waterproof and dustproof. No matter how large the cutting...
morse shank carbide alloy medium duty live centre
Brand:QFMH
Min. Order:1 Piece/Pieces
Model No:MT2,MT3,MT4,MT5
Packaging: carton
Supply Ability:5000
morse shank carbide alloy medium duty live centre, Cemented carbide, accuracy of 0.003, a variety of applicable machine tools can be selected,Material: medium carbon steel; bearing capacity: medium load type; Morse number of tail vertebrae: No. 1,...
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.