All Products

CNC BT ER COLLET CHUCK TOOL HOLDER

BT ER COLLET CHUCK with DIN6499 can be used for clamping straight shank cutters with different sizes. BT tool holder comes in a range of sizes designated as BT30, BT40, BT50, etc, and uses the same NMTB body taper as CAT. BT tooling is symmetrical...

ER40 COLLET CHUCK BT TOOL HOLDER

The commonly used specifications of ER40 tool holder are BT40 and BT50, the length of which is er40-100 and er40-150. Tool holder material: 20CrMnTi is selected as high quality material. After heat treatment, it has better elasticity and wear...

BT collet chuck with balanced 12000rpm

BT collet chuck with balanced 12000rpm ,There are three types of CNC milling cutter shank, BT30 toolholder, BT40 toolholder and BT50 toolholder. It can be divided into: BT SK high-speed toolholder, BT ger high-speed toolholder, BT Er elastic...

BT CNC tool holder ER collet chuck

BT Taper CNC tool holder ER collet chuck，Milling cutter shank is a kind of machine tool accessory used by Bai to hold milling cutter. It is a part of tool holder system in machining or CNC milling machine. The tool used in the CNC milling machine is...

BT30 High Speed BT ER Tool Holders

BT30 ER tool holder material 20CrMnTi, wear-resistant and durable. Tool holder hardness 58-60 degrees, low noise, low wind resistance, high repetitive clamping accuracy. with ER20 cylinder clamp, the speed reaches 20000 revolutions.Bt Collet...

CNC milling collet chuck BT ER tool holder

CNC milling machine collet chuck BT ER TYPE tool holder,ER collet chucks handle a wide range of machining jobs,Simply choose the right size collet for the job, set tool depth, and tighten the collet nut and pull stud to the proper torque using a...

BT ER spring chuck tool holder

The tool holder shank, intermediate connecting rod and tool can be assembled outside the machine tool and then loaded into the tool library of the machining center. According to the different ways of clamping tool, the tool holder can be divided...

BT spring chuck toolholder ER collet chuck

BT spring chuck toolholder,BT ER Collet Chuckcan be used for drilling, milling, twisting, tapping and other processing, with strong practicability and high cost performance. The unique double-layer positioning clamping mode is designed, the front...

SK taper combi shell mill adaptors

combi shell mill adaptors used for holding shell mill cutter SK taper, SK Combine Shell End Mill Arbor Taper shank: tolerance grade <AT3，suitable for the use of the axial or radial drive groove of the milling cutter such as: vertical disc cutter,...

SK combi shell arbor tool holder arbor

SK combi shell arbor SK combi chuck holder tool holder arbor, Taper ground to AT3 or better accuracy standard for maximum contact with spindle,suitable for the use of the axial or radial drive groove of the milling cutter such as: vertical disc...

SK Combi shell mill arbors

SK Combi shell mill arbors , SK Combine Shell End Mill Arbor Hardness: 56-58 HRC，suitable for the use of the axial or radial drive groove of the milling cutter such as: vertical disc cutter, sets of type of milling cutter, face milling cutter,...

Tool Holder DIN69871 Combi Shell Mill Toolholder

Tool Holder DIN69871 Combi Shell Mill Toolholder , SK Combine Shell End Mill Arbor Material: high quality Carburizing Steel Blackening synthesis, and fine grinding，suitable for the use of the axial or radial drive groove of the milling cutter such...

Tool Holder Combi Shell End Mill Arbor

SK Tool Holder Combi Shell End Mill Arbor , Spring Tool Holder Surface Roughness: Ra<0.005mm,suitable for the use of the axial or radial drive groove of the milling cutter such as: vertical disc cutter, sets of type of milling cutter, face...

SK40 Shank Combi Shell End Mill Arbor

SK40 Shank Combi Shell End Mill Arbor , Manufactured from alloy steel with good core strength and long wear life.suitable for the use of the axial or radial drive groove of the milling cutter such as: vertical disc cutter, sets of type of milling...

Combi Shell Mill Holder with DIN69871

Combi Shell Mill Holder SK30 SK40 SK50 Spindle with DIN69871 , All critical surface are precision ground.Dynamically balanced to 15,000RPM at G6.3 by Haimer balancing machine at all location for consistent balance,suitable for the use of the axial...

SK40 Drill Chuck Arbors

SK40 Drill Chuck Arbors ,Each tool holder can be assembled by a variety of serialized modules. Sk Drill Chuck Arbor for different parts and machine tools, different assembly schemes can be adopted to obtain a variety of tool shank series, thus...

DIN69871 Drill Chuck Arbors 40-B16 20CrMnTi

DIN69871 Drill Chuck Arbors 40-B16 20CrMnTi ,Modular cutting tool system is an advanced cutting tool system. Each tool handle can be assembled by a variety of serialized modules. For different parts and machine tools, different assembly schemes can...

clamping tools SK Drill Chuck Arbor Adapter

clamping tools SK Drill Chuck Arbor,For different parts and machine tools, different assembly schemes can be adopted to obtain a variety of tool shank series, thus improving the adaptability and utilization of tool shank. The working part of the...

Material 20CrMnTi SK Drill Chuck Arbor

Material 20CrMnTi SK Drill Chuck Arbor,SK Drill Chuck Arbor Tool holders arranges cover BT30/40/50,CAT30/40/50,DIN69871A30,40,50.The working part of the clamping tool of the integral tool holder is integrated with the handle used for fixing and...

SK Drill Chuck Arbor tool holder

SK Drill Chuck Arbor tool holder,Balanced tool holder available G6.3=12000rpm G2.5=20000rpm.The connecting rod is mainly used for drilling and milling machine used in drill chuck, generally used for lathe, milling machine, machining center machine...

CNC drill chuck arbor SK lathe tool holder

CNC drill chuck arbor SK lathe tool holder ,SK Drill Chuck Arbor Usage:for clamping tools with Morse taper shank and thread according to DIN 228-1 form A.In order to adapt to the transformation of parts and machine tools, users must store various...

milling machine SK50 Drill Chuck Arbors

milling machine SK50 Drill Chuck Arbors ,Three kinds of cooling A:without cooling supply AD:central cooling supply AD/B:central cooling supply and with inernal coolant through the collar.Connecting rod using the alloy structure steel, the hardness...

SK30 Drill Chuck Arbors

SK30 Drill Chuck Arbors ,Sk Tool Holder In order to adapt to the transformation of parts and machine tools, users must store various specifications of tool holders, so the utilization rate of tool holders is low. Modular cutting tool system is an...

DIN69871 SK Drill Chuck CNC APU Collet Chuck

DIN69871 SK Drill Chuck CNC APU Collet Chuck , Application for mounting straight shank tools in ER Collet.SK Tool Holders for mechanical spindle and cutting tool and other accessory tool connection. Is a simple, popular spindle shank connection...