Industry Information

Update July 02, 2020

Spring collet is often used as a unique structure, a spare part. When using, put the chuck into the pressure cap first, and rotate the clip with fingertips. When the part of the shaft of the pressing...

Update June 17, 2020

Er collet torque can smoothly slip and prevent wire breakage

Processing method of Er collet: first, pour the collet into the pressing cap, gently operate the circlip, when the eccentric part of the pressing cap is concave into the groove of the circlip, evenly...

Update June 08, 2020

Using Mohs's collet body to drill deep holes in the tool holder

The inner hole is machined on the lathe, especially the ultra-deep inner hole. According to the usual processing method, only the drill sleeve on the tailstock can be used for drilling. This method...

Update June 03, 2020

Tool loading form of lathe tool holder

Spring collet chuck tool holder It is mainly used for clamping straight shank cutters and tools such as drills, milling cutters and taps. The elastic deformation of the circlip is 1mm, and the...

Update May 13, 2020

Spring collet reduces long-term wear and increases clamping force

The common demand of the spring chuck for the superior skills of the fixture most of the structure of the fixture should select a variety of standard parts and a wide range of parts as far as...

Update May 06, 2020

Spring collet reduces labor and cost

The spring collet usually requires that the structure of all fixture structures should be able to accept all kinds of standard parts and general parts, and the proportion of creating special parts...

Update April 26, 2020

Spring collet with coolant is very good

The spring collet needs all the components of the structure of the fixture in order to be good in the process of the fixture. It should be able to accept all kinds of standard parts and wide-ranging...

Update April 09, 2020

What manufacturing technology is used in spring collet

Manufacturing technology of spring collet: firstly, put the collet into the pressure cap, work the circlip gently, when the eccentric layout of the pressure cap is concave into the groove of the...

Update March 30, 2020

Can the non-standard spring collet be customized?

Spring chucks are mainly divided into rotating mechanical chucks and side pushing mechanical chucks. Safety chucks are mainly divided into four types: shaft seat type, flat push type, flange type and...

Update March 25, 2020

Specification requirements of Er spring collet for fixture workpiece

In the design scheme of Er spring collet, there are various types of workpieces, including metal stamping parts, aluminum profiles and components. Therefore, when designing the scheme, the allowable...