Industry Information

Update August 14, 2019

What is the thermal expansion tool holder?

The principle of thermal shrinkage tool holder is to use the difference of thermal expansion coefficient between the tool holder and the tool to clamp the hot-charging system of the tool strongly....

Update August 13, 2019

Good tool holder, these items must be up to standard!

1. System Accuracy: System Accuracy includes System Positioning and Holding Accuracy and Tool Repeated Positioning Accuracy. The former refers to Tool and Tool Handle. The accuracy of the connection...

Update August 07, 2019

Introduction of taper of BT40 and BT50 high speed tool holder

In general, the most commonly used tool holder is BT tool holder. When the taper of BT tool holder is 7:24 And the speed is about 10,000 r/min, the tool holder-spindle system does not appear obvious...

Update August 06, 2019

Structure and Application of HSK Tool Handle

HSK (German and Italian Hohl Schaft Kegel abbreviation) tool handle is a kind of double-sided clamping tool handle developed by the Institute of Machine Tool Research of Aachen University of...

Update August 01, 2019

What requirements should high-speed tool holder meet in high-speed cutting?

1. System accuracy: The accuracy of the system includes the accuracy of positioning and clamping of the system and the accuracy of repeated positioning of the tool. The former refers to the accuracy...

Update July 31, 2019

How to improve the surface finish of the tool holder?

Product Description: The name of a process before coating after finishing is not uniform at home and abroad. It is called "edge passivation", "edge strengthening", "edge honing", "edge preparation"...

Update July 29, 2019

Introduction to Basic Knowledge of_BT Type CNC Tool Handle

BT CNC tool holder is mainly a Japanese standard, and it is also a commonly used standard. The universal tool handle with taper of 7:24 has five standards and specifications, namely NT (traditional...

Update July 26, 2019

Application of Tool Compensation in CNC Machining

In CNC machining, because the path of tool location controlled by program does not coincide with the shape of actual cutting edge, there is a difference between tool radius and tool length in size....

Update July 25, 2019

Introduction of Tool Holder for Turning-milling Composite Machining Center

1. What is a Turning-Milling compound machining center? Turning-milling compound machining center is a multi-functional machine tool which uses the combined motion of workpiece rotation and tool...

Update July 23, 2019

Characteristics and Application of BT and HSK Tool Holders

HSK handle is a high-speed handle, especially the E series keyless groove is the highest dynamic balance standard main handle SK series speed can not be too high, generally about 10,000 to the limit...