Industry Information

Update April 15, 2019

CNC tool holder fault resolution analysis

The phenomenon of the continuous operation of the tool holder or the failure of a certain tool position and its causes The following is an example of a lathe equipped with a DTM system (Titma CNC...

Update April 02, 2019

Ball bearing and tool holder for turning slender workpiece

The use of ball bearings and tool holders for the cutting of slender workpieces or soft materials (such as plastic bars) can achieve good processing results. This tool holder is very simple to make....

Update March 27, 2019

A new type of tool holder

The method of clamping the tool by the tool holder is to clamp the tool by pulling force (see figure). The tool loading and unloading is very convenient and can improve the efficiency, and the effect...

Update March 26, 2019

Multi-purpose boring tool holder

In our production, we use the multi-purpose fine-tuning boring tool holder (see Figure 1a) to solve the difficulty of boring and milling the groove on the milling machine. The standard Morse cone is...

Update March 20, 2019

Selection of CNC machine tool holder system

The choice of tool system is one of the important contents in the configuration of CNC machine tools, because the tool system not only affects the production efficiency of CNC machine tools, but also...

Update March 19, 2019

Domestic HSK tool holder breaks the monopoly of foreign brands

With the development of high-speed and high-precision machine tools, the spindle speed has been greatly improved. However, in order to take advantage of the cutting precision and dynamic balance of...

Update March 15, 2019

Self-clamping spring collet application

The collet chuck is a more commonly used clamping tool in machining. It is usually used to loosen and lock the thread at the end of the collet to clamp and loosen the workpiece. This is a cumbersome...

Update March 13, 2019

Choosing the right tool holder is the key to controlling costs

Due to the different tool holding methods, a large number of factors such as dimensional accuracy, surface quality, changing time and tool wear are affected. Therefore, the holder has a direct...

Update March 13, 2019

What is the requirement of spring collet for service environment?

Spring collet chuck processing art: when using, first put the chuck into the pressure cap, gently operate the clip spring, waiting for the eccentric equipment of the pressure cap to be concave into...

Update February 28, 2019

The characteristics of various types of tool holders are briefly introduced.

As an important "bridge" connecting machine tools and cutting tools, tool holder is related to machining accuracy, tool life and processing efficiency, and ultimately affects the processing quality...