Industry Information

Update July 27, 2021

Installation of collet

Collet is a locking device for clamping tools or workpieces. It is usually used in drilling and milling machines and machining centers. After selecting the quality, pull the collet to identify the...

Update July 19, 2021

What are the advantages of spring chuck

Spring collet (collet). It is a kind of cylindrical fixture which is used to hold reamer or milling cutter on lathe. It is a kind of fixing device used to fix and reinforce the parts that need to be...

Update July 13, 2021

What is the effective way to choose the right spring collet?

Er spring chuck system has been widely used in machine tools all over the world due to its good scalability and good accuracy. As a tool to use spring collet every day, how to select and install each...

Update July 05, 2021

What should be paid attention to in the process of using spring collet?

In order to make the spring collet can be used stably for a long time, it is necessary to use the collet with the correct method, because if the wrong method is chosen, the damage to the spring...

Update June 30, 2021

What should we pay special attention to when choosing a good spring collet?

If the workpiece limit has to be changed greatly, it may be required to select the jaw chuck to integrate into the production and processing workpiece with a wide operating scale. For hot rolled...

Update June 21, 2021

Advantages and disadvantages of different boring tools

Boring cutter is a very common reaming tool, which can be used in many machines (such as lathe, milling machine, boring machine and modular machine tool, etc.). The machining accuracy of boring can...

Update June 08, 2021

Characteristics of CNC toolholder types

1. When machining curved surface parts, in order to ensure that the cutting edge of the cutting tool is tangent to the machining contour at the cutting point and avoid the interference between the...

Update June 01, 2021

Installation method of spring collet for CNC toolholder

Before installing the spring collet, the clamping spring must be installed into the lock nut, and then the locking nut with the clamping spring must be gently screwed on the connecting rod or the...

Update May 18, 2021

What are the requirements of spring chuck toolholder?

1. Higher hardness and wear resistance the hardness of the cutting part of the tool must be higher than that of the workpiece material. The higher the hardness of the tool material, the better the...

Update May 11, 2021

Different types of CNC milling cutter

1.Milling cutter cutting part of the material milling cutter is used in milling machine cutting workpiece. Commonly used CNC milling cutter cutting part of the material is usually divided into two...