Industry Information

Update February 15, 2023

CNC lathe tool holder problem handling method - Database & Sql Blog Articles

SMD aluminum electrolytic capacitor Brand AVX TPSE226M035R0125 Low impedance tantalum capacitor AVX 22 Electronic scale crystal oscillator 3.2*2.5mm 3225 16M (16.000MHZ) 12PF 10PPM 20PPM 30PPM...

Update February 08, 2023

Analysis of tool and tool holder requirements for CNC lathe

1. Requirements for the tool CNC lathes can double as coarse and fine turning. In order to make the rough car can eat big knife and big knife, the rough car tool is required to have high strength and...

Update February 01, 2023

The four quality elements of the tool holder

CNC machining centers have continued to improve and develop over the past 30 years. The design of these machines is now fully flexible and can be applied to a variety of processing applications from...

Update January 31, 2023

Fault repair of CNC lathe tool holder

The application of numerical control technology and CNC machine tools has successfully solved some automation problems of small-to-medium-sized parts with complex shapes and high consistency. This...

Update December 12, 2022

Skills of using spring collet

During the use of the spring chuck, if it is used with high accuracy, it will generally bore a tool first, so the accuracy of the chuck is the spindle accuracy. For the spring collet after front end...

Update December 01, 2022

What to do if the three-jaw chuck is worn for a long time?

Introduction: The three-jaw chuck is composed of a chuck body, an active jaw and a jaw drive mechanism. The movement of the three movable jaws on the chuck serves to clamp and position the workpiece....

Update December 01, 2022

Improvement of lathe chuck wrench

The improved lathe chuck wrench (see figure) is composed of a handle 1, a bush 2, a spring 3, a sleeve 4 and a body 5. The sleeve 4 and the wrench body 5 are in a clearance fit, and the sleeve 2 and...

Update November 27, 2022

Development of Double-cylinder Four-claw Hydraulic Chuck

1 Introduction With the increasing demand for work efficiency, hydraulic chucks have gradually replaced manual chucks and have been widely used. In order to meet the processing requirements of...

Update November 24, 2022

How to replace a drill chuck?--QINFENG HARDWARE

1.Press the locking tabs on the side of the battery with your fingers and pull the battery out of the Hitachi cordless drill. The battery is below the handle on your drill. 2.Hold the ring with one...

Update November 23, 2022

How to use drill chuck?--QINFENG HARDWARE

A drill is a must-have item for any home owner or construction professional. Drills are available in a variety of sizes and weights, and are run on a battery or an electrical cord. Older drills...